WORLD AG NEWS BRIEF

How direct drilling slashed fuel costs by 30% on Lincs farm

Direct drilling is often promoted as a way to reduce fuel, labour and soil disturbance, but the financial result depends on the machinery being replaced and whether crop performance is maintained. A Lincolnshire case study put figures around that decision at Primrose Farm.

The numbers behind the change

Gary and Debbie Willoughby farm about 110 hectares and undertake contracting across soils ranging from clay and marsh ground to silt. Their rotation includes wheat, barley, linseed, beans and peas. Cultivation had relied on the plough and power harrow before they began sharing a second-hand four-metre Weaving GD direct drill and using a home-built 3.4-metre tine drill.

Farmbench calculations assumed that yield would not change. On that basis, direct drilling reduced total wheat-growing costs by about 4%, or £4,275, while cutting fuel use by 30% and cultivation time by 23%—a saving of 354 hours. Spring barley production cost was reported to fall from £90 a tonne to £64 a tonne.

Flexibility matters more than a single machine

The farm sold its plough but did not adopt a rigid one-pass doctrine. The disc drill or tine drill is selected according to soil condition, residue and the needs of the following crop, and cover crops are used ahead of each cash crop. That flexibility helps avoid forcing one tool into conditions where it does not suit.

These figures are a farm case study and depend on the no-yield-loss assumption. Purchase cost, depreciation, contractor workload, weed pressure and seasonal soil conditions could change the result elsewhere. The transferable lesson is to compare whole-system costs—including time and fuel—then retain enough flexibility to respond to the field.

Read the original report: Farmers Weekly.

Browse news topics

Go deeper with KindHarvest

Explore practical articles, member experience and educational resources connected to this story.